C Category Options and Descriptions

C01 Total Method Defines the method for calculating the cumulative flow. Options include:

• Positive Flow

• Negative Flow

• Net Flow

Changing this method will reset the cumulative flow data. Default setting: Positive Flow.

Option	RS-485 Numbers	Remarks
POS	0	Default
NET	1
NEG	2

After selecting a command, confirm whether to Save or Not Save.

C02 Del. Total (Delete Total) Clears the cumulative flow data. Selecting this option will reset all cumulative flow values to zero.

Option	RS-485 Numbers	Remarks
No	0
Yes	1

After selecting a command, confirm whether to Save or Not Save.

C03 Dosing Mode Manually adjusts the dosing mode to either Count Up (incremental) or Count Down (decremental). Default setting: Off.

Option	RS-485 Numbers	Remarks
OFF	0
Count Up	1	Default
Count Down	2

After selecting a command, confirm whether to Save or Not Save.

C04 Dosing Target Sets the target value for dosing operations. Default value: 1000.

Parameter Input Range	Values
Data Type	float32
Default	1000
Minimum	0.1
Maximum	999,999,999

After selecting a command, confirm whether to Save or Not Save.

C05 Dosing Timer Resets the dosing timer. Minimum value: 1 second. Default value: 300 seconds.

Parameter Input Range	Values
Data Type	int
Default	300
Minimum	1
Maximum	3600

After selecting a command, confirm whether to Save or Not Save.