FU-ES EchoSense Instruction Manual
  • ⚠Safety Instructions
  • This instruction manual version is v1.0
    • Manual Update Log
  • Measurement principle and usage scenario
    • Firmware Update Date and Version Feature Description
  • Warranty
  • Exterior, Specs, Model
  • Installation and Setup
    • Mechanism Installation
    • Mechanical and Electrical iInstallation
    • Parameter setup
      • Z02 Automatic Pipe Size Detection Guide
  • Human Machine Interface
    • Introduction of human machine interface
    • Hybrid Page Setup and Usage Interface Guide
    • Monitoring Screen
    • Simulation Mode
    • Data interpretation on monitoring screens
    • Password input page
    • Setup screen
  • Communication
    • OCT output
    • Analog current output (0-20mA, 4-20mA)
    • RS485 and Modbus RTU Setting
    • Modbus RTU Protocol
      • Read-only memory read instruction(04) and memory lists
      • Read-Write Memory List
      • Read/Write Memory Read Command (03)
      • Read-write memory single Register write instruction(06)
      • Read/Write Memory Dual-Register Write Command (30)
      • Read/Write Memory Four-Register Write Command (31)
      • Single Bit Data Read/Write Commands (01/05) (Commonly Used in HMIs)
  • Parameters Table
    • Z Category Options and Descriptions
    • A Category Options and Descriptions
      • A02 Preset Pipe Specification Table for Different Models
      • A03 ~ A07 Data Range Explanation Based on Model Specifications
    • B Category Options and Descriptions
    • K Category Options and Descriptions
    • C Category Options and Descriptions
    • D Category Options and Descriptions
    • E Category Options and Descriptions
    • F Category Options and Descriptions
    • H Category Options and Descriptions
    • Pagasfsae 1
    • Page 1
  • Alarm and description of system conditions
  • Troubleshootings and Abnormalities
    • Iout 4-20/0-20mA debug process
    • OCT Alarm Debug Process
    • OCT Pulse Debug Process
    • RS485 Debug Process
  • Certification
  • FU-ES Product Page
  • LORRIC English Website
  • LORRIC Integration and Application Center
Powered by GitBook
On this page
  • Monitoring screen detail
  • Monitoring Page No.1~No.3
  • Monitoring Page No.4~No.6
  • State 1 screen description
  • Description of State 2
Export as PDF
  1. Human Machine Interface

Monitoring Screen

PreviousHybrid Page Setup and Usage Interface GuideNextSimulation Mode

Last updated 5 months ago

The monitoring screen is composed of 2 sections. The first 7 pages are real-time data monitoring. The last 15 pages are the current date, time and historical cumulative volume for the past 14 days. All the pages can be viewed cyclically by pressing the middle 2 direction buttons. Each definition on these 22 pages could be found below.

Monitoring screen detail

Page number

Page English Name

LED

LCD backlight

Content of first row

Content of second row

Content of third row

Monitoring Page No.1

FLOWRATE

Data (Up to five digits)

Green means normal condition. Red means abnormal.

Page name and unit

10-digit flow volume data

Function of each button+ simulation mode prompt.

Monitoring Page No.2

FLOW SPEED

Data (Up to five digits)

Green means normal condition. Red means abnormal.

Page name and unit

10-digit flow speed data

Function of each button+ simulation mode prompt.

Monitoring Page No.3

TOTAL

Data (Up to five digits)

Green means normal condition. Red means abnormal.

Page name and unit

Cumulative method+ 10-digit cumulative data

Function of each button+ simulation mode prompt.

Monitoring Page No.4

FLOWRATE

Data (Up to five digits)

Green means normal condition. Red means abnormal.

7-digit large font data

Page name and unit

Monitoring Page No.5

FLOW SPEED

Data (Up to five digits)

Green means normal condition. Red means abnormal.

7-digit large font flow speed data

Page name and unit

Monitoring Page No.6

TOTAL

Data (Up to five digits)

Green means normal condition. Red means abnormal.

7-digit large font cumulative data

Page name, cumulative method and unit

State 1

Alarm Status

Instantaneous flow data

Green means normal condition. Red means abnormal.

Alarm A

Alarm B + Alarm C

System Status

State 2

Debug Page

Instantaneous flow data

Green means normal condition. Red means abnormal.

Monitoring Page No.1~No.3

Monitoring Page No.4~No.6

State 1 screen description

If there is a problem, please make a video or take a photo of this page for the company’s factory to confirm.

Description of Alarm A

Description of Alarm B

Description of Alarm C

Description of system status

Description of State 2

If there is a problem, please make a video or take a photo of this page for the company’s factory to confirm.

Monitoring screen No. 4 is mainly for checking the status of the device, if upper and lower limit alarm functions work as expected, or for troubleshooting there will be a red light. Please see “” for a detailed definition.

Description of status and Alarm