FU-ES EchoSense Instruction Manual
  • ⚠Safety Instructions
  • This instruction manual version is v1.0
    • Manual Update Log
  • Measurement principle and usage scenario
    • Firmware Update Date and Version Feature Description
  • Warranty
  • Exterior, Specs, Model
  • Installation and Setup
    • Mechanism Installation
    • Mechanical and Electrical iInstallation
    • Parameter setup
      • Z02 Automatic Pipe Size Detection Guide
  • Human Machine Interface
    • Introduction of human machine interface
    • Hybrid Page Setup and Usage Interface Guide
    • Monitoring Screen
    • Simulation Mode
    • Data interpretation on monitoring screens
    • Password input page
    • Setup screen
  • Communication
    • OCT output
    • Analog current output (0-20mA, 4-20mA)
    • RS485 and Modbus RTU Setting
    • Modbus RTU Protocol
      • Read-only memory read instruction(04) and memory lists
      • Read-Write Memory List
      • Read/Write Memory Read Command (03)
      • Read-write memory single Register write instruction(06)
      • Read/Write Memory Dual-Register Write Command (30)
      • Read/Write Memory Four-Register Write Command (31)
      • Single Bit Data Read/Write Commands (01/05) (Commonly Used in HMIs)
  • Parameters Table
    • Z Category Options and Descriptions
    • A Category Options and Descriptions
      • A02 Preset Pipe Specification Table for Different Models
      • A03 ~ A07 Data Range Explanation Based on Model Specifications
    • B Category Options and Descriptions
    • K Category Options and Descriptions
    • C Category Options and Descriptions
    • D Category Options and Descriptions
    • E Category Options and Descriptions
    • F Category Options and Descriptions
    • H Category Options and Descriptions
    • Pagasfsae 1
    • Page 1
  • Alarm and description of system conditions
  • Troubleshootings and Abnormalities
    • Iout 4-20/0-20mA debug process
    • OCT Alarm Debug Process
    • OCT Pulse Debug Process
    • RS485 Debug Process
  • Certification
  • FU-ES Product Page
  • LORRIC English Website
  • LORRIC Integration and Application Center
Powered by GitBook
On this page
Export as PDF
  1. Measurement principle and usage scenario

Firmware Update Date and Version Feature Description

Firmware Version: P1203 Release Date: August 2024

Improvements:

  • Improvement I:

    • Added the Hybrid1 main screen.

    • Enhanced Modbus RTU functionality for large numbers (dosing/totalizer) and support for int64 data format:

      • Command 04: Enables reading of int64 large numbers.

      • Command 03: Enables reading of int64-related configuration parameters.

      • Command 31: Introduced a new 64-bit parameter write command. Modbus RTU now supports data reading for dosing.

  • Improvement II:

    • Corrected default pipeline size string and improved cumulative precision when cumulative values are extremely large.

    • Fixed an issue where an incorrect password entry displayed abnormally on the main screen when the password feature was enabled.

    • Resolved a data error when the time unit for instantaneous flow rate was set to "day."

Firmware Version: 1.202

Improvement:

  • Added Modbus RTU commands 03, 06, and 30 to enable remote parameter configuration.

PreviousMeasurement principle and usage scenarioNextWarranty

Last updated 5 months ago