A03 ~ A07 Data Range Explanation Based on Model Specifications

A03 Options A03 offers two different units for inputting pipe dimension data:

Options	RS-485 Numbers	Remarks
mm	0	Default
inch	1

• Depending on the selection of A03 and the machine model, the input ranges for A04 ~ A07 will vary.

• If A04 ~ A07 values are entered first and A03’s unit is subsequently changed, the machine will automatically perform unit conversion.

  • Example: If A04 (Outer Diameter) is entered as 1.0 in inch mode, and A03 is later switched to mm, the A04 value will automatically convert to 25.4 mm.

Input Range for A04 ~ A07 When A03 is in mm Mode Since the relationship is OD - 2 × thickness = ID, if any of the entered parameters cause one of these four parameters (OD, thickness, ID) to exceed the minimum or maximum limits, the data cannot be saved.

FU-ES015 (mm)

Parameter	Default	Minimum	Maximum
A04 Pipe OD(Outer Diameter)	22	15	30
A05 Pipe Perimeter	69.08	47.1	94.2
A06 Pipe thickness	2.7	0.5	5
A07 Pipe ID(Inner Diameter)	16.6	5	29

FU-ES020 (mm)

Parameter	Default	Minimum	Maximum
A04 Pipe OD(Outer Diameter)	26	18	35
A05 Pipe Perimeter	81.64	56.52	109.9
A06 Pipe thickness	2.7	0.8	5.5
A07 Pipe ID(Inner Diameter)	20.6	7	33.4

FU-ES025 (mm)

Parameter	Default	Minimum	Maximum
A04 Pipe OD(Outer Diameter)	32	24	43
A05 Pipe Perimeter	100.48	75.36	135.02
A06 Pipe thickness	3.2	1	6
A07 Pipe ID(Inner Diameter)	25.6	12	41

FU-ES032 (mm)

Parameter	Default	Minimum	Maximum
A04 Pipe OD(Outer Diameter)	38	30	53
A05 Pipe Perimeter	119.32	94.2	166.42
A06 Pipe thickness	3.2	1	6
A07 Pipe ID(Inner Diameter)	31.6	18	51

FU-ES040 (mm)

Parameter	Default	Minimum	Maximum
A04 Pipe OD(Outer Diameter) 管路外徑	48	36	65
A05 Pipe Perimeter 管路圓周	150.72	113.04	204.1
A06 Pipe thickness 管路厚度	3.7	1	6.5
A07 Pipe ID(Inner Diameter)	40.6	23	63

FU-ES050 (mm)

Parameter	Default	Minimum	Maximum
A04 Pipe OD(Outer Diameter)	60	46	78
A05 Pipe Perimeter	188.4	144.44	244.92
A06 Pipe thickness	4.1	1	8
A07 Pipe ID(Inner Diameter)	51.8	30	76

FU-ES065 (mm)

Parameter	Default	Minimum	Maximum
A04 Pipe OD(Outer Diameter)	76	58	92
A05 Pipe Perimeter	238.64	182.12	288.88
A06 Pipe thickness	4.1	1.4	10
A07 Pipe ID(Inner Diameter)	67.8	38	89.2

FU-ES075 (mm)

Parameter	Default	Minimum	Maximum
A04 Pipe OD(Outer Diameter)	89	70	120
A05 Pipe Perimeter	279.46	219.8	376.8
A06 Pipe thickness	5.4	1.5	12
A07 Pipe ID(Inner Diameter)	78.2	46	117

Input Range for A04 ~ A07 When A03 is in Inch Mode The same rule applies: OD - 2 × thickness = ID. If any entered parameter causes one of these four parameters to exceed the permissible range, saving will be restricted.

FU-ES015 (inch)

Parameter	Default	Minimum	Maximum
A04 Pipe OD(Outer Diameter) 管路外徑	0.866	0.591	1.181
A05 Pipe Perimeter 管路圓周	2.720	1.854	3.709
A06 Pipe thickness 管路厚度	0.106	0.02	0.197
A07 Pipe ID(Inner Diameter)	0.654	0.197	1.142

FU-ES020 (inch)

Parameter	Default	Minimum	Maximum
A04 Pipe OD(Outer Diameter) 管路外徑	1.024	0.709	1.378
A05 Pipe Perimeter 管路圓周	3.214	2.225	4.327
A06 Pipe thickness 管路厚度	0.106	0.031	0.217
A07 Pipe ID(Inner Diameter)	0.811	0.276	1.315

FU-ES025 (inch)

Parameter	Default	Minimum	Maximum
A04 Pipe OD(Outer Diameter) 管路外徑	1.260	0.945	1.693
A05 Pipe Perimeter 管路圓周	3.956	2.967	5.316
A06 Pipe thickness 管路厚度	0.126	0.039	0.236
A07 Pipe ID(Inner Diameter)	1.008	0.472	1.614

FU-ES032 (inch)

Parameter	Default	Minimum	Maximum
A04 Pipe OD(Outer Diameter)	1.496	1.181	2.087
A05 Pipe Perimeter	4.698	3.709	6.552
A06 Pipe thickness	0.126	0.039	0.236
A07 Pipe ID(Inner Diameter)	1.244	0.709	2.008

FU-ES040 (inch)

Parameter	Default	Minimum	Maximum
A04 Pipe OD(Outer Diameter)	1.890	1.417	2.559
A05 Pipe Perimeter	5.934	4.45	8.035
A06 Pipe thickness	0.146	0.039	0.256
A07 Pipe ID(Inner Diameter)	1.598	0.906	2.48

FU-ES050 (inch)

Parameter	Default	Minimum	Maximum
A04 Pipe OD(Outer Diameter)	2.362	1.811	3.071
A05 Pipe Perimeter	7.417	5.687	9.643
A06 Pipe thickness	0.161	0.039	0.315
A07 Pipe ID(Inner Diameter)	2.039	1.181	2.992

FU-ES065 (inch)

Parameter	Default	Minimum	Maximum
A04 Pipe OD(Outer Diameter)	2.992	2.283	3.622
A05 Pipe Perimeter	9.395	7.17	11.373
A06 Pipe thickness	0.161	0.055	0.394
A07 Pipe ID(Inner Diameter)	2.669	1.496	3.512

FU-ES075 (inch)

Parameter	Default	Minimum	Maximum
A04 Pipe OD(Outer Diameter)	3.504	2.756	4.724
A05 Pipe Perimeter	11.002	8.654	14.835
A06 Pipe thickness	0.213	0.059	0.472
A07 Pipe ID(Inner Diameter)	3.079	1.811	4.606