Manual and Product Version
Last updated
Access parameter H12 – System Info to verify the device model and main unit version.
P1205: Device firmware version (identical to the version shown on the startup screen)
D1205 and S1101: Hardware version
025: Device model (DN25 pipe size)
The startup screen is displayed for approximately three seconds after the flowmeter is powered on.
LORRIC: Trademark
FU-ES 025: Device model (DN25 pipe size)
P1205 Device firmware version
A label is affixed to the flowmeter housing.
FU-ES 025: Device model (DN25 pipe size)
22UD00433 Device serial number
• Hardware 1.0/2.0 refers to the product's hardware version.
Note: The label may become unreadable over time. It's recommended to record the serial number upon receipt.



Pxxxx + Dxxxx + Sxxxx + Pipe Size
P followed by numbers (Pxxxx)
Device firmware version
Example: P1205 → Firmware version 1205
D followed by numbers (Dxxxx) + S followed by numbers (Sxxxx)
Hardware version
Example: D1205 S1101 → Hardware version D1205 S1101
Pipe Size
Numeric code (DN unit)
Example: 025 → DN25 Pipe diameter, 050 → DN50, 075 → DN75, etc.

Vxx.yy
Leading digits (xx) – Major Version
Incremented with each major update or content revision.
Example: V01.00 → Major version 1.00
Trailing digits (yy) – Minor Revision
Incremented with minor corrections or small changes.
Example: V01.01 → Minor revision based on V01.00
V01.00
Major Version – Initial release or major update
V01.01
Minor Revision – Minor adjustments or error corrections
V02.00
Major Version – Significant update
This manual is available in multiple languages. Manuals of the same version, regardless of language, correspond to the same hardware and firmware versions.
Last updated