FP-AS510 Paddle Wheel Flowmeter Instruction Manual
  • ⚠Safety instructions
  • This instruction manual version is v1.0
  • Measure principle and usage scenario
  • Warranty
  • Exterior, Spec, Model
    • Device
    • Paddle set
    • T-connector
  • Install and set-up
    • Mechanism installation
    • Mechanical and electrical installation
    • Parameter setup
  • Human machine interface
    • Introduction of human machine interface
    • Monitoring screen
    • Data interpretation on monitoring screens
    • Setup screen
  • Communication
    • OCT output
    • 4-20mA
    • RS485
    • Modbus RTU Protocol
      • Read-only memory read instruction(04) and memory lists
      • Read-write memory list
      • Read-write memory read instruction(03)
      • Read-write memory single Register write instruction(06)
      • Read-write memory double Register write instruction(30)
  • Parameters Table
  • Alarm and description of system conditions
  • Trouble and abnormality shooting
  • Certification
  • FP-AS510 Product Page
  • LORRIC English Website
  • LORRIC Integration and Application Center
Powered by GitBook
On this page
  • Exterior
  • Package contains
  • Size, material, model

Was this helpful?

Export as PDF
  1. Exterior, Spec, Model

Paddle set

PreviousDeviceNextT-connector

Last updated 3 years ago

Was this helpful?

Exterior

Package contains

Besides other agreements, our standard package contains:

  • Paddle set (incl. paddle base, paddle wheel, shaft) * 1

  • Paddle set M4 screws * 4

  • Paddle set O-ring * 1

Paddle set could be purchased separately, or shipped with a T-connector.

Size of each part will affect the accuracy of flow volume monitoring. We suggest using OEM parts for correct results.

Size, material, model

Parts

Material

Paddle Wheel

Al2O3

Shaft sleeve

Al2O3

Paddle

PVDF or PPH

Paddle base

UPVC, PPH or PVDF (for order made)

Paddle set O-ring

EPDM、VITON、FEPM (for order made)

Paddle set M4 screws

Stainless steel 304