Exterior, Spec, Model
Last updated
Was this helpful?
Last updated
Was this helpful?
The video about the introduction of device, paddle set, T-connector and power cable.
Watch the video or scan the the QR code below.
Mechanism Specs
Installation method
in-line (Pipe segment)
Fluid in pipes temperature
0~50 °C (32~122°F)
Device working environment temperature
-10~60°C (14~140°F)
T-connector adapter
UPVC Gluing adapter (ASTM, JIS, DIN)
UPVC internal and external thread adapter (BSPT and NPT)
T-connector diameter
DN20-50 (¾" to 2")
Paddle material
PVDF or PPH with embedded magnet + ceramic bearing and shaft
T-connector material
UPVC
Power supply
DC 12V to 36V 100mA
Response time
< 0.5 second
Waterproof level
IP65 *
Measurement Specs
Applicable fluid maximum dynamic viscosity
300cSt***
Applicable fluid
Clear, oil or chemicals with less impurities (<1%)
Linearity
± 0.5 % FS (>0.3m/s)
Reproducibility
± 0.4 %
OR tolerance
± 2.5 % OR
Measuring principle
Paddle Wheel
Flow velocity range
± 0.3~10m/s
Can extend to ± 0.15m ~ 10m/s **
Transient data
Instantaneous flow volume and flow velocity
Cumulative data
Positive and negative net flow volume accumulation, past 14 days and long time accumulative net flow volume.
User Interface
Language
English, Traditional Chinese, Simplified Chinese (Others customizable)
Unit
Metric: Litre, cubic meters, meters
Imperial: foot, Cubic foot, Uk gallon, US gallon
Time: second, minute, hour, day
Display
Double screen display : Large 5-Digit LED, 16x3 3-Color Backlight LCD display
Display digits
LED 5 Digits (4 digits when negative value)/ LCD 10 Digits (Not including sign and decimal point)
Operation buttons
4 Key touch buttons
Wired communication
Analog output 4-20mA ( External Power Supply Required)/ Modbus RTU RS485 Two-line/ OCT switch signal（ship with 2 meter cable）
Calendar function battery
CR2032
* IP65：The IP Code, International Protection Marking, IEC standard 60529, sometimes interpreted as Ingress Protection Marking, classifies and rates the degree of protection provided by mechanical casings and electrical enclosures against intrusion, dust, accidental contact, and water. The first digit indicates the level of protection that the enclosure provides against access to hazardous parts (e.g., electrical conductors, moving parts) and the ingress of solid foreign objects. The second digit indicates the level of protection that the enclosure provides against harmful ingress of water.
6 stands for dust tight: No ingress of dust; complete protection against contact (dust tight). A vacuum must be applied. Test duration of up to 8 hours based on air flow.
5 stands for water jets: Water projected by a nozzle (6.3 mm) against enclosure from any direction shall have no harmful effects.
** The flow velocity range may be slightly different due to factors such as piping diameter and fluid coefficient.
*** The device is calibrated with normal temperature water. Fluids with different viscosities may have different results, and may also change the minimum and maximum flow velocity.
