FP-AS510 Paddle Wheel Flowmeter Instruction Manual
  • ⚠Safety instructions
  • This instruction manual version is v1.0
  • Measure principle and usage scenario
  • Warranty
  • Exterior, Spec, Model
    • Device
    • Paddle set
    • T-connector
  • Install and set-up
    • Mechanism installation
    • Mechanical and electrical installation
    • Parameter setup
  • Human machine interface
    • Introduction of human machine interface
    • Monitoring screen
    • Data interpretation on monitoring screens
    • Setup screen
  • Communication
    • OCT output
    • 4-20mA
    • RS485
    • Modbus RTU Protocol
      • Read-only memory read instruction(04) and memory lists
      • Read-write memory list
      • Read-write memory read instruction(03)
      • Read-write memory single Register write instruction(06)
      • Read-write memory double Register write instruction(30)
  • Parameters Table
  • Alarm and description of system conditions
  • Trouble and abnormality shooting
  • Certification
  • FP-AS510 Product Page
  • LORRIC English Website
  • LORRIC Integration and Application Center
Powered by GitBook
On this page

Was this helpful?

Export as PDF

Certification

The product obtained FCC/CE certification.

The product obtained RoHS certification.

PreviousTrouble and abnormality shooting

Last updated 3 years ago

Was this helpful?