FP-AS510 Paddle Wheel Flowmeter Instruction Manual
  • ⚠Safety instructions
  • This instruction manual version is v1.0
  • Measure principle and usage scenario
  • Warranty
  • Exterior, Spec, Model
    • Device
    • Paddle set
    • T-connector
  • Install and set-up
    • Mechanism installation
    • Mechanical and electrical installation
    • Parameter setup
  • Human machine interface
    • Introduction of human machine interface
    • Monitoring screen
    • Data interpretation on monitoring screens
    • Setup screen
  • Communication
    • OCT output
    • 4-20mA
    • RS485
    • Modbus RTU Protocol
      • Read-only memory read instruction(04) and memory lists
      • Read-write memory list
      • Read-write memory read instruction(03)
      • Read-write memory single Register write instruction(06)
      • Read-write memory double Register write instruction(30)
  • Parameters Table
  • Alarm and description of system conditions
  • Trouble and abnormality shooting
  • Certification
  • FP-AS510 Product Page
  • LORRIC English Website
  • LORRIC Integration and Application Center
Powered by GitBook
On this page
  • Exterior
  • Device Functionalities
  • Package contains
  • Size, material, model

Was this helpful?

Export as PDF
  1. Exterior, Spec, Model

Device

PreviousExterior, Spec, ModelNextPaddle set

Last updated 5 years ago

Was this helpful?

Exterior

Device Functionalities

LED monitor mainly provides high contrast numbers display for high visibility even in a dark environment.

LED monitor also provides 5 displayed digits within a decimal point which mainly displays real-time and accumulated flow volume data. For more digits of data, such as historical data and long-term cumulative data, please see the LCD.

LCD monitor allows display for 16 English characters in 3 rows . The first row is current content with units. The second row is data. The third row is a definition of each button.

The LCD screen has a 3-color backlit display. Definition of each color light as below:

  1. Geen: Real-time data, device is working normally.

  2. Red:

    2. Continuous red light: Alarm B- Current status of the device meets the parameters set-up by the user so must pay attention to it. Alarm C- The calendar battery needs to be replaced.

  3. Orange: Non real-time data display. Historical data query and set-up page display.

There are 4 buttons on the device, the definition of each button will be displayed at the upper row on the LCD screen. Generally, the leftmost button stands for “Exit” or “Back to last page”. The middle 2 buttons are for users to review page by page, modify data, or switch option. The rightmost button stands for “Set” or “Confirm”. Previously mentioned definitions are only for general use. For some other use scenarios, button definitions are modifiable for usability or error proof.

Package contains

Besides other agreements, our standard package contains:

  • FP-AS510 Device * 1

  • 2m 8pin cable * 1

  • Quick starting manuel * 1

  • Screws to connect the device and paddle set (Locking screws with your convenient side is suggested. It is unnecessary locking screws both sides)

Paddle set and T-connector can be purchased separately

Size, material, model

Parts

Material

Screws for top side housing

Stainless steel 304

Screen cover

PMMA

Whole housing without screen cover

PC+GF

Buttons

PET

2 meters long 8 pin cable with insulation cover

​

Union nuts of 2 meters long 8 pin cable

​

Oring of 2 meters long 8 pin cable

​

Sealing ring for top housing

​

M12 8 pin

​

Blinking red light: Alarm A- Major error. Please see the “” page for more details.

Alarm and Description of System Conditions