Device

Exterior

Device Functionalities

LED monitor mainly provides high contrast numbers display for high visibility even in a dark environment.

LED monitor also provides 5 displayed digits within a decimal point which mainly displays real-time and accumulated flow volume data. For more digits of data, such as historical data and long-term cumulative data, please see the LCD.

LCD monitor allows display for 16 English characters in 3 rows . The first row is current content with units. The second row is data. The third row is a definition of each button.

The LCD screen has a 3-color backlit display. Definition of each color light as below:

1. Geen: Real-time data, device is working normally.

2. Red:

   1. Blinking red light: Alarm A- Major error. Please see the “Alarm and Description of System Conditions” page for more details.

   2. Continuous red light: Alarm B- Current status of the device meets the parameters set-up by the user so must pay attention to it. Alarm C- The calendar battery needs to be replaced.

3. Orange: Non real-time data display. Historical data query and set-up page display.

There are 4 buttons on the device, the definition of each button will be displayed at the upper row on the LCD screen. Generally, the leftmost button stands for “Exit” or “Back to last page”. The middle 2 buttons are for users to review page by page, modify data, or switch option. The rightmost button stands for “Set” or “Confirm”. Previously mentioned definitions are only for general use. For some other use scenarios, button definitions are modifiable for usability or error proof.

Package contains

Besides other agreements, our standard package contains:

• FP-AS510 Device * 1

• 2m 8pin cable * 1

• Quick starting manuel * 1

• Screws to connect the device and paddle set (Locking screws with your convenient side is suggested. It is unnecessary locking screws both sides)

Paddle set and T-connector can be purchased separately

Size, material, model

Parts	Material
Screws for top side housing	Stainless steel 304
Screen cover	PMMA
Whole housing without screen cover	PC+GF
Buttons	PET
2 meters long 8 pin cable with insulation cover	​
Union nuts of 2 meters long 8 pin cable	​
Oring of 2 meters long 8 pin cable	​
Sealing ring for top housing	​
M12 8 pin	​

Mechanical and electrical spec of device

Power supply

Power supply	​
Working specification	12V ~ 36V 90mA (4-20mA and RS485 current are not included.)
Reverse voltage protection	Yes
Overcurrent protection	200mA

OCT output

OCT output	​
Power supply spec	5V~30V 200mA
Reverse voltage protection	Yes
NPN connection	Yes
PNP connection	Yes
Maximum output frequency	700Hz
Overcurrent protection	200mA

Analog output (4-20mA, 0-20mA)

Analog output (4-20mA, 0-20mA)	​
Wiring	4 wiring
Power supply	Device is self-powered, no external power supply required.
Maximum output range	0~21.6mA
Response time	<1s, the same as screen data.
Loop Resistance	1100 ohm @ 36V 600 ohm @ 24V 250 ohm @ 12V

Digital communication Modbus RTU RS485

Digital communication Modbus RTU RS485​
Baud	9600, 19200, 38400, 57600
Wiring	2 wiring
Nodes on the bus	32