Installation and Configuration

Verify the manual version corresponds to both the hardware and firmware of the unit. To check the manual version, please refer to the version page.
Ensure the installation environment meets the measurement requirements. A sufficient length of straight pipe must be present both upstream and downstream of the flow meter to stabilise the flow profile. The optimal installation position is on the side of a horizontal pipe or in a vertical pipe with upward flow (from bottom to top).
Confirm the pipe material is suitable in terms of temperature resistance, chemical compatibility, and correct dimensions.
The chemical composition and operating temperature of the fluid can vary significantly across industries. Please review the chemical properties of the fluid carefully prior to purchasing the flow meter, to avoid potential damage.
This flow meter operates using magnetic sensing technology. The presence of magnetic particles in the fluid may interfere with its operation, and such fluids should be avoided. The unit should also be installed away from sources of strong electromagnetic fields, such as motors and solenoid valves.

Last updated 24 days ago

Verify the manual version corresponds to both the hardware and firmware of the unit. To check the manual version, please refer to the version page.
Ensure the installation environment meets the measurement requirements. A sufficient length of straight pipe must be present both upstream and downstream of the flow meter to stabilise the flow profile. The optimal installation position is on the side of a horizontal pipe or in a vertical pipe with upward flow (from bottom to top).
Confirm the pipe material is suitable in terms of temperature resistance, chemical compatibility, and correct dimensions.
The chemical composition and operating temperature of the fluid can vary significantly across industries. Please review the chemical properties of the fluid carefully prior to purchasing the flow meter, to avoid potential damage.
This flow meter operates using magnetic sensing technology. The presence of magnetic particles in the fluid may interfere with its operation, and such fluids should be avoided. The unit should also be installed away from sources of strong electromagnetic fields, such as motors and solenoid valves.

Last updated 24 days ago