FU-TX 310 Clamp-on Ultrasonic Flowmeter Manual v3.
  • This instruction manual version is v3.0
  • Firmware update date and version function description
  • 1. Product Introduction
    • 1.1 Specifications
    • 1.2 Important concepts
    • 1.3 Product features
    • 1.4 Product applications
    • 1.5 Measuring principle
    • 1.6 Product contents
    • 1.7 User interface
      • 1.7.1 Screen interfaces
      • 1.7.2 Buttons
      • 1.7.3 LED message
  • 2. Installation Method
    • 2.1 Power
    • 2.2 Ultrasonic probe
      • 2.2.1 Probe wiring
      • 2.2.2 Meter wiring
      • 2.2.3 Installation location
      • 2.2.4 Installation method
      • 2.2.5 ​Probe installation method
    • 2.3 Temperature sensor/Analog output
      • 2.3.1 Temperature sensor
      • 2.3.2 Analog output
      • 2.3.3 RS485
    • 2.4 Installation check
      • 2.4.1 RSSI (Signal Strength)
      • 2.4.2 Q value
      • 2.4.3 Flight time
  • 3. Output Interface
  • 4. Setting up the Interface
    • 4.1 Intial menu settings
    • 4.2 Units
    • 4.3 Meter (Measurement Settings)
    • 4.4 Communication
    • 4.5 Other
    • 4.6 Save
  • 5. Error Messages and Solutions
  • 6. Other Conditions
  • 7. MODBUS Communication Protocol
  • 8. Cautions
  • 9. Sound Speeds Data
  • LORRIC Integration and Application Center
Powered by GitBook
On this page
  • This instruction manual version is v3.0
  • Method for confirming product version
  • Definition of hardware version number
  • Definition of firmware version number vYY.XX.ZZ
  • Definition of instruction manual version
  • We provide multi-language instruction manuals

Was this helpful?

Export as PDF

This instruction manual version is v3.0

This instruction manual version is v3.0

This document is applicable to below products.

Hardware version v4.0.0

Firmware version v1.2.1

Method for confirming product version

You could find hardware and firmware version on the sticker at the right side of the device.

Firmware version could be found on the bottom right of boot screen indicated by red arrow sign in below image.

Definition of hardware version number

Format of hardware version number vYY.XX.ZZ

Hardware version number starts by lowercase v, followed by 1 to 2 numbers as YY which represents important modification of electronic and mechanism affects product’s core function. Following 1 or 2 numbers as XX represents modification of non-core function. The last 1 or 2 numbers as ZZ represents modification which does not affect product function, such as mechanism features and adjustment of electronic component level.

Definition of firmware version number vYY.XX.ZZ

Format of firmware version number vYY.XX.ZZ

Firmware version number starts by lowercase v, followed by 1 to 2 numbers as YY which represents important modification of firmware. Following 1 or 2 numbers as XX represents modification of non-core function. The last 1 or 2 numbers as ZZ represents modification which does not affect product function.

Definition of instruction manual version

Format of instruction manual version vXX.ZZ

Version number starts from lowercase “v”, following 2 numbers “XX” which version of instruction manual released on certain year.The last 1 or 2 numbers as ZZ represents revised serial number of the version.

Due to modifications in mechanisms, electrical or firmware that could affect usage or installation methods, LORRIC will release new versions of the instruction manual. For example, if the definition of aviation plug changes then we will release an updated manual. At the same time, for clients who own older models, the appropriate manual will still be available.

If modifications in the instruction manual don't affect the usage, but are just for improvements in grammar, sentence structure, etc. LORRIC will not release a new version.

We provide multi-language instruction manuals

The instruction manual was firstly written in traditional chinese. We also provide multi-language versions. The same instruction manual version in each language is for the same hardware and firmware.

NextFirmware update date and version function description

Last updated 8 months ago

Was this helpful?