Read/Write Memory – Read List
When reading large values with different data formats (e.g., Float32 or Int64), tiny differences may occur due to internal calculations, typically less than 1/10,000, which is normal.
Read commands must not exceed 20 registers; longer requests will be ignored. See the register list for details.
How to Use the Read/Write Memory List
Field Name
Function
Register Address
Addresses for read/write memory, not shared with read-only memory.
Register Length
Length of the register variable.
Memory Content Name
Describes the name or purpose of the memory content.
Data Type
Specifies the format of transmitted or received data.
Read Command
Indicates the available read commands.
Write Command
Indicates the available write commands. A value of X in this column means remote writing is not supported for that register.
Category Option List Link
Links to detailed items in each category.
Memory List
Field Name
Function
Reg Location
Specifies the location of the read-write memory, distinct from the read-only memory space.
Reg Length
Defines the data length of the register variable.
Memory Content Name
Provides a description of the memory content.
Data Format
Specifies the format used for data transmission and reception.
Read Command
Indicates availability for read commands.
Write Command
Indicates availability for write commands. Certain register positions marked with "X" do not support remote writing.
Classification Option List Link
Links to detailed items under each category menu.
Read-Write Memory List
C parameter Category
Last updated