Z Category Options and Descriptions

The Z category lists the most frequently used functions from other categories in sequence, allowing users to adjust the device more conveniently.

Z02 Auto Pipe Spec – Automatic Pipe Specification Detection

Z03 Auto Initialization – Automatic System Initialization

Activating this function allows the flow meter to adjust its signal state according to environmental conditions. This function should be executed after every reinstallation. It is identical to A21.

Z04 Auto Zero Offset – Automatic Zero-Flow Calibration

Ensure the pipeline is stationary and fully filled with liquid before executing this function to correct zero-flow errors. This function is identical to A22.

Z05 Scale Factor – Flow Scaling Factor Setting

Multiplies the measured flow data by a fixed ratio, adjustable from 0.001 to 1000. To configure negative flow measurement, refer to A17. This setting is synchronised with K03.