Identify Hardware/Firmware Version
Select Product Manual Version
Drawing
Use the methods below to identify your product Hardware/Firmware Version
Access parameter H12 – System Info to verify the device model and main unit version.
P1002 : Device firmware version (identical to the version shown on the startup screen)
D1002 and S1102 : Hardware version
015 : Device model (DN8 pipe size)
The startup screen is displayed for approximately three seconds after the flowmeter is powered on.
LORRIC : Trademark
FU-LT 020 : Device model (DN8 pipe size)
P1002 : Device firmware version
A label is affixed to the flowmeter housing.
FU-LT 015 : Device model (DN8 pipe size)
SN: 15-026 : Device serial number
Note: The label may become unreadable over time. Record the serial number upon receipt.
After identifying the Hardware & Firmware Version, Refer to the information below to select the right product manual
The latest version is available to all users
P1001
FU-LT V1
Dimensions and shapes shown are for reference only. Final products may vary due to manufacturing tolerances and design revisions. Please refer to the actual product to confirm.
dn08
dn10
dn15
dn20
dn25
Last updated 2 months ago
