FU-ES Ultrasonic Flowmeter

Contents

• Identify Hardware/Firmware Version

• Select Product Manual Version

• Drawing

Identify Hardware/Firmware Version

Use the methods below to identify your product Hardware/Firmware Version

H12 System Info	Startup Screen	Device Label
Access parameter H12 – System Info to verify the device model and main unit version. P1003: Device firmware version (identical to the version shown on the startup screen) D1205 and S1102: Hardware version 008: Device model (DN8 pipe size)	The startup screen is displayed for approximately three seconds after the flowmeter is powered on. LORRIC: Trademark FU-ES 025: Device model (DN25 pipe size) P1205: Device firmware version	A label is affixed to the flowmeter housing. FU-ES 025: Device model (DN25 pipe size) 22UD00433 Device serial number • Hardware 1.0/2.0 refers to the product's hardware version. Note: The label may become unreadable over time. It's recommended to record the serial number upon receipt.

Select Product Manual Version

After identifying the Hardware & Firmware Version, Refer to the information below to select the right product manual

Customer group	Hardware Ver.	Firmware Ver.	Manual link	Note
The latest version is available to all users	1.0/2.0~	P1203	FU-ES English V1

Drawing

Type	2D dxf	2D PDF	3D Step
DN15	dn15_body_lite.dxf	dn15_body_lite.pdf	dn15_body_lite.step
DN20	dn20_body_lite.dxf	dn20_body_lite.pdf	dn20_body_lite.step
DN25	dn25_body_lite.dxf	dn25_body_lite.pdf	dn25_body_lite.step
DN32	dn32_body_lite.dxf	dn32_body_lite.pdf	dn32_body_lite.step
DN40	FU-ES_DN40.dxf	FU-ES_DN40.pdf	dn40-STP.step
DN50	FU-ES_DN50.dxf	FU-ES_DN50.pdf	dn50-STP.step
DN65	FU-ES_DN65.dxf	FU-ES_DN65.pdf	dn65-STP.step
DN75	FU-ES_DN75.dxf	FU-ES_DN75.pdf	dn75.step