> For the complete documentation index, see [llms.txt](https://docs.lorric.com/qr/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.lorric.com/qr/fu-tx320-english-v1/parameters/a-measurement-setup/a07-pipe-inner-diameter.md).

# A07 Pipe Inner Diameter

### Definition

Set the pipe inner diameter. Default values vary depending on the selected pipe unit.

| Inner Diameter | Default                           | Minimum                           | Maximum                            |
| -------------- | --------------------------------- | --------------------------------- | ---------------------------------- |
| DN15           | <p>16.6 mm</p><p>0.654 inch</p>   | <p>5 mm</p><p>0.197 inch</p>      | <p>29 mm</p><p>1.142 inch</p>      |
| DN20           | <p>20.9 mm</p><p>0.811 inch</p>   | <p>7 mm</p><p>0.276 inch</p>      | <p>33.4 mm<br>1.315 inch</p>       |
| DN25           | <p>25.6 mm</p><p>.008 inch</p>    | <p>12 mm</p><p>0.472 inch</p>     | <p>41 mm</p><p>1.614 inch</p>      |
| DN32           | <p>31.6 mm</p><p>1.244 inch</p>   | <p>18 mm</p><p>0.709 inch</p>     | <p>51 mm</p><p>2.008 inch</p>      |
| DN40           | <p>40.6 mm</p><p>1.598 inch</p>   | <p>23 mm</p><p>0.906 inch</p>     | <p>63 mm</p><p>2.48 inch</p>       |
| DN50           | <p>51.8 mm</p><p>2.039 inch</p>   | <p>30 mm</p><p>1.181 inch</p>     | <p>76 mm</p><p>2.992 inch</p>      |
| DN65           | <p>67.8 mm</p><p>2.669 inch</p>   | <p>38 mm</p><p>1.496 inch</p>     | <p>89.2 mm</p><p>3.512 inch</p>    |
| DN75           | <p>78.2 mm</p><p>3.079 inch</p>   | <p>46 mm</p><p>1.811 inch</p>     | <p>117 mm</p><p>4.606 inch</p>     |
| DN100          | <p>100.8 mm</p><p>3.969 inch</p>  | <p>88.9 mm</p><p>3.5 inch</p>     | <p>102.3 mm</p><p>4.028 inch</p>   |
| DN125          | <p>126 mm</p><p>4.961 inch</p>    | <p>114.6 mm</p><p>4.512 inch</p>  | <p>128.2 mm</p><p>5.047 inch</p>   |
| DN150          | <p>146 mm</p><p>5.748 inch</p>    | <p>130.8 mm</p><p>5.15 inch</p>   | <p>154.06 mm</p><p>6.065 inch</p>  |
| DN200          | <p>194.4 mm</p><p>7.654 inch</p>  | <p>182.6 mm</p><p>7.189 inch</p>  | <p>203.4 mm</p><p>8.008 inch</p>   |
| DN250          | <p>240.4 mm</p><p>9.465 inch</p>  | <p>229.2 mm</p><p>9.024 inch</p>  | <p>254.51 mm</p><p>10.02 inch</p>  |
| DN300          | <p>286.2 mm</p><p>11.268 inch</p> | <p>257.8 mm</p><p>10.15 inch</p>  | <p>303.23 mm</p><p>11.938 inch</p> |
| DN350          | <p>332 mm</p><p>13.071 inch</p>   | <p>290.6 mm</p><p>11.441 inch</p> | <p>349 mm</p><p>13.74 inch</p>     |
| DN400          | <p>376 mm</p><p>14.803 inch</p>   | <p>327.4 mm</p><p>12.89 inch</p>  | <p>396.4 mm</p><p>15.606 inch</p>  |

### Notes

1. Pipe size units are determined by **B06 (Pipe Size Unit)**.
2. <mark style="color:red;">Each time the pipe size is changed, please re-execute</mark> <mark style="color:red;">**Z03 Auto Initialize**</mark> <mark style="color:red;">and</mark> <mark style="color:red;">**Z04 Auto Zero Offset**</mark> <mark style="color:red;">to improve measurement accuracy and ensure stable product performance.</mark>
3. On certain firmware versions, a pipe material confirmation page will appear after setting **A07 Pipe Wall Thickness**. Please select the matching pipe material or choose **Custom**. If a predefined pipe material is selected, **A08 (Pipe Material)** will be synchronized automatically.
4. For **DN100–DN400**, Default corresponds to A02's **CNS W** specification; Minimum/Maximum are the smallest and largest inner diameter among all specifications listed in **A02 (Preset Pipe Spec)** for that size.

### Operation Procedure

<details>

<summary><strong>Button Functions</strong> <em>(Click to Expand)</em></summary>

When the main screen is displayed in **green backlight**, the four buttons function as follows:

* <img src="https://content.gitbook.com/content/fX3l9RzQpCUpspFteU5B/blobs/ya5mjywEtI16s3njJOBl/image" alt="" data-size="line"> **Blue Button (leftmost):** Return, exit, or save settings.
* Gray Direction Buttons:
  * <img src="https://content.gitbook.com/content/fX3l9RzQpCUpspFteU5B/blobs/0uWDDSFxxM6CfKg9agyl/image" alt="" data-size="line"> **Left Gray:** Previous Page, decrease value, or select item
  * <img src="https://content.gitbook.com/content/fX3l9RzQpCUpspFteU5B/blobs/MPA7mtqj4g7MXG4MSKfd/image" alt="" data-size="line"> **Right Gray:** Next Page, increase value, or select item
* <img src="https://content.gitbook.com/content/fX3l9RzQpCUpspFteU5B/blobs/tN3ntfY5TFvvlg0tCaZg/button-orange.png" alt="" data-size="line"> **Orange Button (rightmost):** Rightmost button: Enter settings, edit, or confirm selection

{% hint style="danger" %}
**Do not hold buttons for extended periods to avoid damage.**
{% endhint %}

{% hint style="info" %}
Button functions may change depending on the operation context to improve usability or prevent accidental presses.
{% endhint %}

</details>

```
A07 Pipe Inner Diameter Setting Steps
• From the main screen(green backlight), 
  press Orange Button(Setup) to enter settings (orange backlight).
• Use Gray Arrow Buttons to select A. Measurement, press Orange Button(Enter).
• Use Gray Arrow Buttons to select A07 Pipe Inner Diameter, press Orange Button(Enter).
• Use Gray Arrow Buttons to choose the digit to adjust(highlighted in dark gray).
• Press Orange Button(Edit) to enter adjustment mode.
• Adjust digits: Left Gray Button to increase, Right Gray Button to decrease.
• Press Orange Button(Set) to confirm each digit; repeat for other digits as needed.
• After all digits are set, press Blue Button(Save).
• Confirm by pressing Orange Button(Save) (or Blue Button(NOT) to cancel).
• On certain versions, a "Pipe Material Confirmation" screen will be displayed.
• Use the gray arrow keys to select the matching pipe material or Custom, 
  then press the orange Set key to confirm.
• Press Blue Button(ESC) to return to the main screen(green backlight).
```

<figure><img src="https://2757023840-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2FfX3l9RzQpCUpspFteU5B%2Fuploads%2FiNA7OScd3lc0TtdHcfEs%2FFU-TX320-A07-en.png?alt=media&#x26;token=04f764e3-70ac-47a4-a17c-b558ddb83e9e" alt="" width="394"><figcaption></figcaption></figure>

## A07 Options, RS485 Values, Read/Write Commands, and Formats

| Refer to the table above | Refer to the table above | Refer to the table above |
| ------------------------ | ------------------------ | ------------------------ |
| Custom                   | Refer to the table above | -                        |
| Minimum                  |                          | -                        |
| Maximum                  |                          | -                        |

> Refer to the [Read/Write Memory List](https://docs.lorric.com/qr/fu-tx320-english-v1/communication/modbus-rtu-protocol/read-write-memory-ram/read-write-memory-read-listx.md) for the Modbus command format. This parameter uses the float 32 data format.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://docs.lorric.com/qr/fu-tx320-english-v1/parameters/a-measurement-setup/a07-pipe-inner-diameter.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
