For the complete documentation index, see llms.txt. This page is also available as Markdown.

Product Appearance, Specifications, and Model

Exterior

Models & Dimensions

Device Housing Size

TM-1 Tansducer Size

PT-100 Temperature Sensor Size

Product Specifications

1. Mechanical Specifications

Installation method

Clamp-On

Applicable pipe material

Metal pipe, Plastic pipe (UPVC/PPH/PVDF/PFA/PTFE)

Applicable pipe size

2”~16” (DN 50 ~ 400)

Pipe wall working temperature

Standard: 0 ~ 80°C | High-temp: 0 ~ 150°C

Device working environment temperature

-10~60°C (14~140°F) (The higher the temperature of the fluid in the pipe, the lower the upper limit of the ambient temperature.)

Power requirement

DC 24V 200mA

Transducer cable length

10 m (Waterproof / M12 connector)

Response time

≤0.5 to 1 s

2. Measurement Specifications

Measurement Principle

Ultrasonic Time of Flight Time of Flight (ToF)

Applicable fluid

Clear, oil or chemicals with less impurities (<1%)

Flow Velocity Range*

Recommended: ±0.3 to 6.0 m/s, Measurable: ±0.1 to 8.0 m/s

Linearity

± 0.5 % FS (>0.3m/s)

Repeatability

± 0.4 %

OR tolerance

±3.0% OR (10%-100% F.S.)

±0.3% F.S. (0%-10% F.S.)**

Measurement range

0.5 ~ 8 m/s

Instantaneous data

Instantaneous flow volume and flow velocity

Cumulative data

Cumulative flow (optional positive, negative or net flow)

Temperature Measurement

3-wire PT100

Temperature rating

-20 ~ 150°C

Waterproof rating***

Wall-mount host: IP67 | Probe: IP61 (Standard) / IP68 (optional)

* The specified flow velocity range is based on measurements with water in PVC pipe. Different liquids or pipe materials may affect ultrasonic signal transmission and result in a different measurable flow velocity range.

** Measurement accuracy is calibrated under controlled laboratory conditions using clean water at room temperature with CNS UPVC piping. Actual results may vary depending on fluid properties, piping conditions, installation, and environmental factors.

*** IP67 Rating IP67 stands for Ingress Protection 67. The IP rating is a standard that classifies the degree of protection provided by an electrical enclosure against the intrusion of foreign objects. The format is IPXX, where XX represents two digits: the first digit indicates the level of protection against contact and solid foreign objects (dust protection), and the second digit indicates the level of protection against water ingress. A higher number indicates a higher level of protection. For IP67: the 6 means complete protection against dust ingress; the 7 means protection against powerful water jets without harmful effect.

3. Electrical Specifications

  • Power supply

    Whole device power supply

    Working specification

    24V 200mA (4-20mA and RS485 current are not included.)

    Reverse voltage protection

    Yes

  • OCT output

    Power supply spec

    5V~30V 200mA

    Reverse voltage protection

    Yes

    NPN connection

    Yes

    PNP connection

    Yes

    Maximum output frequency

    700Hz

    Overcurrent protection

    200mA

  • Analog output (4-20mA, 0-20mA)

    Wiring

    3 wiring

    Power supply

    Device shares power with the main unit, no external power supply required.

    Output range

    0–20 mA or 4–20 mA (selectable)

    Maximum output range (incl. error signal)

    0~21.6 mA (0–20 mA mode) / 2.4~21.6 mA (4–20 mA mode)

    Resolution

    16-bit (0–24 mA physical range)

    Response time

    ≤0.5 to 1s (matches display update rate)

    Max Loop Resistance

    600 ohm @ 24V

  • Digital communication Modbus RTU RS485

    Baud

    9600, 19200, 38400, 57600

    Wiring

    2 wiring

    Nodes on the bus

    32

4. User Interface

Language

English, Traditional Chinese, Simplified Chinese (Others customizable)

Unit

Metric: Liter, cubic meters Imperial: foot, Cubic foot, Uk gallon, US gallon Time: second, minute, hour, day Velocity: m/s, ft/s

Display

Single-screen 3-color backlit LCD, 3 lines × 16 characters (English) Line 1: Current parameter and unit Line 2: Measurement data Line 3: Key definitions (see Human-Machine Interface section)

Display digits

10 digits (plus sign and decimal point)

Operation buttons

4 Key touch buttons

Wired communication

Self-powered Analog output 4-20mA/0-20mA Modbus RTU RS485 Two-line Optocoupler switch signal (shipped with 2 meter cable)

5. Temperature Sensor (add on)

Temperature sensor model

LS-0-1 Surface Copper-Patch Sensor

Sensor type

PT100, TF3M waterproof

Accuracy

1/3 Class B, ±0.1°C

Temperature measurement range

-40°C ~ 180°C (-40°F ~ 356°F)

Cable length

5 m / 10 m, 3-wire

Probe dimensions

Copper plate 20×20×3.2Φ×30L

Sensing material

Copper

Wire material

TEFLON

Wire gauge

24AWG × 3C

Shipping Contents

Besides other agreed contents, our standard package contains:

Item Name
Amount
Notes
Image

FU-TX320 Main Unit

* 1

TM-1 transducer

* 1 (Pair)

Pre-wired with IP61 waterproof connector cable

8-pin power & communication cable with flying leads (S)

* 1

(2m/5m cable length, depends on stock)

DIN rail backplate module

* 1

(DIN rail itself not included)

Quick starting manual

* 1

Metal Bracket

V mount: *1 Z mount: *2

Metal Strap

V mount: *2 Z mount: *4

Also available as upgrade / add-ons:

Amount
Notes

AC power adapter

*1

(upgrade from standard DC)

IP68 waterproof transducer cable

*1 (Pair)

(upgrade from standard IP61)

M12 connector transducer

*1 (Pair)

IP61 or IP68 (upgrade from standard waterproof connector)

PT100 temperature sensor, copper plate patch-type

*1

8-pin cable (2m/5m) + 110 VAC 60Hz to 24 VDC transformer

*1

(upgrade from standard flying-leads-only cable)

Last updated