LogoLogo
CtrlK
  • This instruction manual version is v2.1
  • 1. Product Introduction
  • 2. Installation Method
    • 2.1 Power
    • 2.2 Ultrasonic probe
    • 2.3 Temperature sensor/Analog output
    • 2.4 Installation check
      • 2.4.1 RSSI (Signal Strength)
      • 2.4.2 Q value
      • 2.4.3 Flight time
  • 3. Output Interface
  • 4. Setting up the Interface
  • 5. Error Messages and Solutions
  • 6. Other Conditions
  • 7. MODBUS Communication Protocol
  • 8. Cautions
  • 9. Sound Speeds Data
  • LORRIC Integration and Application Center
Powered by GitBook
On this page
  1. 2. Installation Method

2.4 Installation check

2.4.1 RSSI (Signal Strength)2.4.2 Q value2.4.3 Flight time
Previous2.3.3 Wiring methodNext2.4.1 RSSI (Signal Strength)