E13 Iout Range

Definition

Defines the output range of the flow meter’s analog signal. Default: 4–20 mA.

Notes

Modifying this setting affects the options in E09 Iout Error. After making changes, verify that E09 is configured according to your requirements.

Operation Procedure

Button Functions (Click to Expand)

The main unit has four buttons. The bottom line (Line 3) of the LCD displays the current function of each button. Under normal operation, the button functions are as follows:

• Blue Button - Leftmost button: Return, exit, or save settings.

Gray Arrow Buttons:

• Left Gray Button: Page up, increase value, or select item

• Right Gray Button: Page down, decrease value, or select item

• Orange Button: Rightmost button: Enter settings, edit, or confirm selection

Do not hold buttons for extended periods to avoid damage.

Button functions may change depending on the operation context to improve usability or prevent accidental presses.

E13 Analog Output Range Setting Steps
• From the main screen (green backlight), 
  press Orange Button (Setup) to enter settings (orange backlight).
• Use Gray Arrow Buttons to select E. Commute , press Orange Button (Enter).
• Use Gray Arrow Buttons to select E13 Analog Output, press Orange Button (Enter).
• Use Gray Arrow Buttons to choose the options. 
• Press Orange Button (Set) to confirm.
• Press Blue Button (ESC) to return to the main screen (green backlight).

E13 Options, RS485 Values, Read/Write Commands, and Formats

Option	Description	RS-485 Value
4 - 20 mA (Default)		0

Refer to the Read/Write Memory List for the Modbus command format. This parameter uses the Int16 data format.