A10 Liquid Type
Definition
Set the liquid type. Default: custom.
Notes
Operation Procedure
Button Functions (Click to Expand)
The main unit has four buttons. The bottom line (Line 3) of the LCD displays the current function of each button. Under normal operation, the button functions are as follows:
Blue Button - Leftmost button: Return, exit, or save settings.
Gray Arrow Buttons:
Left Gray Button: Previous Page, decrease value, or select item
Right Gray Button: Next Page, increase value, or select item
Orange Button: Rightmost button: Enter settings, edit, or confirm selection
Do not hold buttons for extended periods to avoid damage.
A10 Liquid Type Setting Steps
• From the main screen (green backlight),
press Orange Button (Setup) to enter settings (orange backlight).
• Use Gray Arrow Buttons to select A. Measurement , press Orange Button (Enter).
• Use Gray Arrow Buttons to select A10 Liquid Type, press Orange Button (Enter).
• Use Gray Arrow Buttons to choose the options.
• Press Orange Button (Set) to confirm.
• Press Blue Button (ESC) to return to the main screen (green backlight).
A10 Options, RS485 Values, Read/Write Commands, and Formats
Custom (Custom)
Custom
0
Water 20℃
68°F
1
Water 50℃
122°F
2
Water 75℃
167°F
3
Water 100℃
212°F
4
Water 125℃
257°F
5
Water 150℃
302°F
6
Water 175℃
347°F
7
Water 200℃
392°F
8
Water 225℃
437°F
9
Acetone
10
Carbinol
11
Ethanol
12
Alcohol
13
Acetaldehyde
14
Arachis Oil
15
Glycerin
16
Gasoline
17
Benzene
18
Ethyl Benzene
19
Toluene
20
Chloromethane
21
Petroleum
22
Pine Oil
23
Cloroethylene
24
Ketone
25
Glycol
26
Sea Water
27
Refer to the Read/Write Memory List for the Modbus command format. This parameter uses the Int16 data format.
Last updated