A08 Pipe Material

Definition

Set the pipe material. Default: custom.

DN8	DN10	DN15	DN20	DN25
SUS 304	PVC	PVC	PVC	PVC

Notes

1. On certain models, a “Pipe Material Confirmation” screen will appear after adjusting A04, A05, A06, or A07. If the pipe material is modified on this screen, A08 will be updated automatically.

2. Each time the pipe material is changed, please re-execute Z03 Auto Initialize and Z04 Auto Zero Offset to improve measurement accuracy and ensure stable product performance.

Operation Procedure

Button Functions (Click to Expand)

The main unit has four buttons. The bottom line (Line 3) of the LCD displays the current function of each button. Under normal operation, the button functions are as follows:

• Blue Button - Leftmost button: Return, exit, or save settings.

Gray Arrow Buttons:

• Left Gray Button: Page up, increase value, or select item

• Right Gray Button: Page down, decrease value, or select item

• Orange Button: Rightmost button: Enter settings, edit, or confirm selection

Do not hold buttons for extended periods to avoid damage.

Button functions may change depending on the operation context to improve usability or prevent accidental presses.

A08 Pipe Material Setting Steps
• From the main screen (green backlight), 
  press Orange Button (Setup) to enter settings (orange backlight).
• Use Gray Arrow Buttons to select A. Measurement, press Orange Button (Enter).
• Use Gray Arrow Buttons to select A08 Pipe Material , press Orange Button (Enter).
• Use Gray Arrow Buttons to choose the options. 
• Press Orange Button (Set) to confirm.
• Press Blue Button (ESC) to return to the main screen (green backlight).

A08 Options, RS485 Values, Read/Write Commands, and Formats

Optionx	Description	RS-485 Value
Custom	Custom	0
PVCU		1
PVC		2
PP		3
PVDF		4
ABS		5
Steel		6
SUS 304	Stainless Steel 304	7
SUS 316	Stainless Steel 316	8
Copper		9
PFA		10
PE		11

Refer to the Read/Write Memory List for the Modbus command format. This parameter uses the Int16 data format.