A02 Preset Pipe Spec

Definition

Select the pipe standard used by the flowmeter. Default: custom.

Model	Pipe Spec Options
FU-LT008 (DN8)	Metal JIS G3459：SCH40 / SCH80 / 8A ISO SUS DIN 1850 SUS Copper Type L	Plastic ISO 15494 PPH ISO 10931 PVDF ISO 8061 PVC ISO 15493 ABS	PFA 1/2" PFA 12 mm PFA 12 mm PFA（W1.5） 13 mm PFA	Others custom
FU-LT010 (DN10)	Metal ASTM SUS：SCH40 / SCH80 JIS G3459：SCH40 / SCH80 / 10A ISO SUS DIN 1850 SUS Copper Type L	Plastic ISO 15494 PPH ISO 10931 PVDF ISO 8061 PVC ISO 4427 PE ISO 15493 ABS JIS K6742 PVC-U ASTM PVC：SCH40 / SCH80 CNS W PVC CNS E PVC	PFA 5/8 PFA	Others custom
FU-LT015 (DN15)	Metal ASTM SUS：SCH40 / SCH80 / SCH120 JIS G3459：SCH40 / 15A ISO SUS DIN 1850 SUS Copper Type L：19 mm / 22 mm	Plastic ISO 15494 PPH ISO 10931 PVDF ISO 8061 PVC ISO 4427 PE ISO 15493 ABS JIS K6742 PVC-U ASTM PVC：SCH40 / SCH80 / SCH120 CNS W PVC CNS E PVC	PFA 3/4" PFA 19 mm PFA	Others custom
FU-LT020 (DN20)	Metal ASTM SUS：SCH40 / SCH80 / SCH120 JIS G3459：SCH40 / 20A JIS G3447：1S ISO SUS DIN 1850 SUS Copper Type L	Plastic ISO 15494 PPH ISO 10931 PVDF ISO 8061 PVC ISO 4427 PE ISO 15493 ABS ASTM PVC：SCH40 / SCH80 / SCH120 JIS K6742 PVC-U CNS W PVC CNS E PVC	PFA 1 PFA 25mm PFA	Others 3A Standard： 3A 1.25mm, 3A 1.65mm custom
FU-LT025 (DN25)	Metal ASTM SUS：SCH80 ISO SUS DIN 1850 SUS JIS G3459：SCH40 / 25A JIS G3447：1.25S Copper Type L	Plastic ISO 15494 PPH ISO 10931 PVDF ISO 8061 PVC ISO 4427 PE ISO 15493 ABS ASTM PVC：SCH40 / SCH80 / SCH120 JIS K6742 PVC-U CNS W PVC CNS E PVC	PFA	Others custom

Notes

1. Each time the pipeline size is changed, perform Z03 Auto Initialize and Z04 Auto Zero Offset to ensure accurate flow readings and maintain stable product quality.

2. Tube specifications vary depending on the model and firmware version. Confirm the machine’s model and version to select the correct tube specification table. To check the model and version, follow the steps below:

H12 System Info	Startup Screen	Device Label
Access parameter H12 – System Info to verify the device model and main unit version. P1002: Device firmware version (identical to the version shown on the startup screen) D1003 and S1102: Hardware version 015: Device model (DN15 pipe size)	The startup screen is displayed for approximately three seconds after the flowmeter is powered on. LORRIC: Trademark FU-LT 020: Device model (DN8 pipe size) P1002: Device firmware version	A label is affixed to the flowmeter housing. FU-LT 015: Device model (DN8 pipe size) SN: 15-026: Device serial number Note: The label may become unreadable over time. Record the serial number upon receipt.

Operation Procedure

Button Functions (Click to Expand)

The main unit has four buttons. The bottom line (Line 3) of the LCD displays the current function of each button. Under normal operation, the button functions are as follows:

• Blue Button - Leftmost button: Return, exit, or save settings.

Gray Arrow Buttons:

• Left Gray Button: Previous Page, decrease value, or select item

• Right Gray Button: Next Page, increase value, or select item

• Orange Button: Rightmost button: Enter settings, edit, or confirm selection

Do not hold buttons for extended periods to avoid damage.

Button functions may change depending on the operation context to improve usability or prevent accidental presses.

A02 Present Pipe Spec Setting Steps
• From the main screen (green backlight), 
  press Orange Button (Setup) to enter settings (orange backlight).
• Use Gray Arrow Buttons to select A. Measurement , press Orange Button (Enter).
• Use Gray Arrow Buttons to select A02 Preset Pipe Spec, press Orange Button (Enter).
• Use Gray Arrow Buttons to choose the options. 
• Press Orange Button (Set) to confirm.
• Press Blue Button (ESC) to return to the main screen (green backlight).

A02 Options and RS485 Values, Read/Write Commands, and Formats

Refer to the tube specification table corresponding to the model.

A02 Tube Specification – Model FU-LT008, Version P1002 / P1003 Parameter Table

FU-LT008	RS-485 int
custom	0(Custom)
JIS G3459 sch40	1
JIS G3459 sch80	2
JIS G3459 8a	3
ISO 15494 PPH	4
ISO 10931 PVDF	5
ISO 8061 PVC	6
ISO 15493 ABS	7
ISO SUS	8
1/2 PFA	9
12mm PFA	10
12mm PFA W1.5	11
13mm PFA	12
DIN1850 SUS	13
Copper Type L	14

A02 Tube Specification – Model FU-LT010, Version P1002 / P1003 Parameter Table

FU-LT010	RS-485 int
custom	0(Custom)
CNS W	1
CNS E	2
JIS K6742	3
ASTM SCH40 PVC	4
ASTM SCH40 SUS	5
ASTM SCH80 PVC	6
ASTM SCH80 SUS	7
JIS G3459 sch40	8
JIS G3459 sch80	9
JIS G3459 10a	10
ISO 15494 PPH	11
ISO 10931 PVDF	12
ISO 8061 PVC	13
ISO 4427 PE	14
ISO 15493 ABS	15
ISO SUS	16
5/8 PFA	17
DIN1850 SUS	18
Copper Type L	19

A02 Tube Specification – Model FU-LT015, Version P1002 / P1003 Parameter Table

FU-LT015	RS-485 int
custom	0(Custom)
CNS W	1
CNS E	2
JIS K6742	3
ASTM SCH40 PVC	4
ASTM SCH40 SUS	5
ASTM SCH80 PVC	6
ASTM SCH80 SUS	7
ASTM SCH120 PVC	8
ASTM SCH120 SUS	9
JIS G3459 sch40	10
JIS G3459 15a	11
ISO 15494 PPH	12
ISO 10931 PVDF	13
ISO 8061 PVC	14
ISO 4427 PE	15
ISO 15493 ABS	16
ISO SUS	17
3/4 PFA	18
19mm PFA	19
DIN1850 SUS	20
Copper Type L 19mm	21
Copper Type L 22mm	22

A02 Tube Specification – Model FU-LT020, Version P1002 / P1003 Parameter Table

FU-LT020	RS-485 int
custom	0(Custom)
CNS W	1
CNS E	2
JIS K6742	3
ASTM SCH40 PVC	4
ASTM SCH40 SUS	5
ASTM SCH80 PVC	6
ASTM SCH80 SUS	7
ASTM SCH120 PVC	8
ASTM SCH120 SUS	9
JIS G3459 sch40	10
JIS G3459 20a	11
JIS G3447 1S	12
ISO 15494 PPH	13
ISO 10931 PVDF	14
ISO 8061 PVC	15
ISO 4427 PE	16
ISO 15493 ABS	17
ISO SUS	18
3A 1.25mm	19
3A 1.65mm	20
1 PFA	21
25mm PFA	22
DIN1850 SUS	23
Copper Type L	24

A02 Tube Specification – Model FU-LT025, Version P1002 / P1003 Parameter Table

FU-LT025	RS-485 int
custom	0(Custom)
CNS W	1
CNS E	2
JIS K6742	3
ASTM SCH40 PVC	4
ASTM SCH80 PVC	5
ASTM SCH80 SUS	6
ASTM SCH120 PVC	7
JIS G3459 sch40	8
JIS G3459 25a	9
JIS G3447 1.25S	10
ISO 15494 PPH	11
ISO 10931 PVDF	12
ISO 8061 PVC	13
ISO 4427 PE	14
ISO 15493 ABS	15
ISO SUS	16
DIN1850 SUS	17
Copper Type L	18