A Measurement Setup

No.	Name	Description
A01	Auto Pipe Spec	Automatically detect pipeline specifications, and automatically jump to A02 to display the results after completion. This function is the same as Z02.
A02	Pipe Type	Select the line model to correct the data. Or select "Custom" to customize the pipe size and material. (After installation is complete or if the pipeline size or material is changed, please perform Auto Initialize (Z03) and Auto Zero Offset (Z04) again to improve the accuracy of the flow meter readings and ensure product stability.)
A03	Pipe Geo. Unit	Pipe gauge unit, synchronized with B06. (After installation is complete or if the pipeline size or material is changed, please perform Auto Initialize (Z03) and Auto Zero Offset (Z04) again to improve the accuracy of the flow meter readings and ensure product stability.)
A04	Pipe OD	Can be set when A01 is "custom". Dimensions are in accordance with B06. After adjustment, A04 and A06 will be automatically recalculated. (After installation is complete or if the pipeline size or material is changed, please perform Auto Initialize (Z03) and Auto Zero Offset (Z04) again to improve the accuracy of the flow meter readings and ensure product stability.)
A05	Pipe Perimeter	Can be set when A01 is "custom". Dimensions are in accordance with B06. After adjustment, A03 and A06 will be automatically recalculated. (After installation is complete or if the pipeline size or material is changed, please perform Auto Initialize (Z03) and Auto Zero Offset (Z04) again to improve the accuracy of the flow meter readings and ensure product stability.)
A06	Pipe thickness	Can be set when A01 is "custom". Dimensions are in accordance with B06. A06 will automatically recalculate after adjustment. (After installation is complete or if the pipeline size or material is changed, please perform Auto Initialize (Z03) and Auto Zero Offset (Z04) again to improve the accuracy of the flow meter readings and ensure product stability.)
A07	Pipe ID	Can be set when A01 is "custom". Dimensions are in accordance with A02. (After installation is complete or if the pipeline size or material is changed, please perform Auto Initialize (Z03) and Auto Zero Offset (Z04) again to improve the accuracy of the flow meter readings and ensure product stability.)
A08	Pipe Material	Set the pipe material, modify the flow data or select "Custom" to customize the sound velocity of the pipe. (After installation is complete or if the pipeline size or material is changed, please perform Auto Initialize (Z03) and Auto Zero Offset (Z04) again to improve the accuracy of the flow meter readings and ensure product stability.)
A09	Pipe Soundspeed	When A08 is customized, you can manually set the sound velocity of the pipe, and the unit is set in B04.
A10	Liq. Type	Select the fluid type to correct the data. Or select "Custom" to customize fluid parameters.
A11	Auto Liq. Sound Speed	After enabling this function, the flowmeter will automatically detect the sound velocity of the fluid into the calculation. The default is off. (FW 2.0.0 released.)
A12	Liq. Sound Speed	When A10 is customized, the fluid sound velocity can be manually set, and the unit is set in B04.
A13	Liq. Dyna. Viscosity	When A10 is customized, the fluid dynamic viscosity can be manually set, and the unit is g/cm3.
A15	Damping	Reduce data fluctuations, the lowest is 0, which is off, the default value is 10.
A16	Direction	The direction of the fluid can be reversed, and the normal flow direction can be preset.
A17	Neg Flow (Negative Flow)	Whether to display negative flow, the default is on.
A18	Zero Cutoff	How much flow rate (absolute value) below is displayed as zero, set to 0 means off, default off.
A19	Fast Update	Increased screen update rate to every 0.5 seconds. The default is off.
A20	Anti-Noise	Eliminates unstable noise in measurement, can be turned off, and is turned on by default.
A21	Auto Initialization	Enabling this function will allow the flowmeter to adjust the signal state based on the environmental conditions. Please execute this function once every time you reinstall. This function is the same as Z03.
A22	Auto Zero Offset	Please install the pipeline on a pipeline that is still and full inside, and activate this function to correct the zero flow error. This function is synchronized with Z04.
A23	Zero Offset	Manually adjust or zero the Zero offset data.
A24	Startup Pipe Check	After starting, there will be 5 seconds to confirm whether to use the A01 automatic regulation confirmation function. On by default.