> For the complete documentation index, see [llms.txt](https://docs.lorric.com/qr/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.lorric.com/qr/fp-as510-paddle-wheel-flowmeter-manual-chinese-v2/parameters/d-jing-bao-ji-tong-zhi-she-ding.md).

# D 警報及通知設定

### D 警報及通知 參數列表

| 序號  | 英文名稱                                            | 中文名稱      | 功能                                                                                                                    |
| --- | ----------------------------------------------- | --------- | --------------------------------------------------------------------------------------------------------------------- |
| D01 | Paddle Ala. (Paddle Alarm)                      | 蹼輪警報      | <p>Alarm - A</p><p>蹼輪異常警報。可關閉。預設開啟。</p>                                                                               |
| D02 | Mag. Ala.(Magnetic Alarm)                       | 磁場警報      | <p>Alarm - A </p><p>設定外部磁場干擾的警報。可關閉。預設開啟。</p>                                                                         |
| D03 | <p>Bat. Alarm<br>(Battery Alarm)</p>            | 電量警報      | <p>Alarm - C</p><p>設定CR2032即將沒電時的警報，可關閉。預設開啟。注意：拔下電池須等待一分鐘，電池警報才會顯示。</p>                                              |
| D04 | <p>FlowLIM Ala<br>(Flow Volume Limit Alarm)</p> | 流量範圍警報    | <p>Alarm - B</p><p>設定超出瞬間流量範圍時的的警報，可關閉。預設關閉</p>                                                                       |
| D05 | Up LIM (Upper Limit)                            | 流量上限      | 定義 D04 的流量正常範圍上限。                                                                                                     |
| D06 | Low LIM (Lower Limit)                           | 流量下限      | 定義 D04 的流量正常範圍下限。                                                                                                     |
| D07 | <p>Hysteresis%<br>(Hysteresis Percentage)</p>   | 流量遲滯%     | <p>設定流量上下限警報解除的的遲滯百分比</p><p>百分比的定義是上下限間距的百分比。</p><p>範圍是0-33%，預設值 3%。</p><p>本參數必需是正值。</p>                              |
| D08 | Total Ala. (Total Alarm)                        | 累計警報      | <p>Alarm - B</p><p>設定超出累計流量範圍時的警報，可關閉。預設關閉</p>                                                                        |
| D09 | Total Trig. (Total Alarm Trigger Condition)     | 累計條件      | <p>設定累計量目標值(D08)的通知條件，大於目標或小於目標。</p><p>預設大於目標。</p>                                                                    |
| D10 | Total Target                                    | 累計目標      | 設定累計目標值。                                                                                                              |
| D11 | Iout Alarm                                      | 類比輸出警報    | <p>Alarm B</p><p>設定超出4-20mA 範圍時是否警報，可關閉。預設關閉。</p>                                                                     |
| D12 | Speed Alarm                                     | 流速警報      | <p>Alarm B </p><p>設定流速絕對值超出 10m/s 範圍時是否警報，可關閉。預設開啟。</p>                                                               |
| D13 | PulseOverlap                                    | 脈衝時間過長    | <p>Alarm B </p><p>脈衝輸出(Pulse output) 訊號重疊警報。參數 E03 設定過大，導致 Pulse Output 輸出訊號重疊。可關閉，預設開啟。</p>                          |
| D14 | IoutStatAla (Iout Status Alarm)                 | Iout 狀態警報 | 設定Iout 狀態警示模式，可選開啟、關閉 和勿擾模式(Do not disturb)，預設勿擾模式。勿擾模式表示發生異常時，螢幕顯示的顏色和 LED不會改變，但仍可在通訊部分顯示數字及狀態頁的位元顯示異常。(FW2.2.0以後功能) |

**參數 D 分類設定的影片**

觀看以下的影片或掃描下面的QR code。(\*新增和修改的參數請參考本版說明書的參數列表)

{% embed url="<https://youtu.be/aCyTQW7UbnI>" %}
參數 D 分類設定影片
{% endembed %}

![參數 D 分類設定影片](https://2086194569-files.gitbook.io/~/files/v0/b/gitbook-legacy-files/o/assets%2F-LxeY3bBEflHg4JOGyfX%2F-MKd5Oj1hzYXOkK2GQGG%2F-MKd9NMhW6Nm92q8y2xB%2F%E5%8F%83%E6%95%B8%20D%20%E5%88%86%E9%A1%9E%E8%A8%AD%E5%AE%9A%E5%BD%B1%E7%89%87.jpg?alt=media\&token=aa35326f-658b-4eea-bf02-8b72de25605a)


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://docs.lorric.com/qr/fp-as510-paddle-wheel-flowmeter-manual-chinese-v2/parameters/d-jing-bao-ji-tong-zhi-she-ding.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.