E02 OCT Info

Definition

Sets the definition for the flow meter’s OCT operation. Default: Off.

Notes

1. If E02 is set to “Pulse v2”, configure the pulse width in E03 Pulse Time and set the pulse reference unit in E14 Pulse v2 Unit.

2. Flow alarms are configured via D04, D05, D06; Totalizer alarms via D08, D09, D10; Pulse v2 settings via E03, E14.

Operation Procedure

Button Functions (Click to Expand)

The main unit has four buttons. The bottom line (Line 3) of the LCD displays the current function of each button. Under normal operation, the button functions are as follows:

• Blue Button: Leftmost button: Return, exit, or save settings.

• Gray Direction Buttons:

  • Left Gray: Previous Page, increase value, or select item

  • Right Gray: Next Page, decrease value, or select item

• Orange Button: Rightmost button: Enter settings, edit, or confirm selection

Do not hold buttons for extended periods to avoid damage.

Button functions may change depending on the operation context to improve usability or prevent accidental presses

E02 OCT Info. Setting Steps
• From the main screen (green backlight), 
  press Orange Button (Setup) to enter settings (orange backlight).
• Use Gray Arrow Buttons to select E. Commute , press Orange Button (Enter).
• Use Gray Arrow Buttons to select E02 OCT Info., press Orange Button (Enter).
• Use Gray Arrow Buttons to choose the options. 
• Press Orange Button (Set) to confirm.
• Press Blue Button (ESC) to return to the main screen (green backlight).

E02 Options, RS485 Values, Read/Write Commands, and Formats

Options	RS-485 Value
Alarm B	1
Pulse V2	6
Off (Default)	7