E Commute - FP-AS310R

No.	Name	Description
E04	Modbus ID	Set up Modbus ID location, default 1. (Only applicable to Model FP-AS310R)
E05	Baud	Sets the Modbus communication baud rate for the flow meter. The Master and Slave must use the same baud rate for communication. Default: Off. (Only applicable to Model FP-AS310R)
E15	Byte format	Sets the data format for Modbus RTU communication. Default: N,8,1 (No parity, 8 data bits, 1 stop bit). (Only applicable to Model FP-AS310R)
E16	Bit order	Sets the bit order for each byte during Modbus RTU transmission. (Only applicable to Model FP-AS310R)
E17	Endianness	Sets the byte order for multi-byte data during RX (flow meter response) transmission. (Only applicable to Model FP-AS310R)