Set A1 for the Pipe type
Set B1 for the flow rate volume unit
Set B2 for the flow volume time unit
Set B3 for the cumulative volume unit
Press ESC several times, Go back to monitor screen, check if flow direction is expected, use A04 A05 to change flow direction display
In the monitor screen, check if the flow volume is as expected, use A02 to scale flow volume.
E type parameters are for communication setup
F type parameter for communication simulation
Remove the device from the T-connector, and check if the lcd backlight blinks a red light. Reinstall the device and check if the LCD monitor goes back to a green light.
Leave the device screen on one of 3 monitoring screens (flow volume, flow speed, totalizer).
Finish.